High speed assembly is the assembly of a Rubik's cube for a while.
You can read more about the high speed assembly here.
To study high speed assembly, you need to learn how to quickly rotate the cube, as well as learn algorithms and understand certain principles.
The ability to quickly collect the cube increases the interest of participating in meetings and competitions.
If you have already learned how to assemble a cube using one of the simple techniques and confidently assemble it without cheat sheets, then it's time to think about speeding up the assembly.
This article contains the necessary tips and links to resources for mastering the way to improve the assembly of the cube.
A standard development path is proposed (Friedrich, upper grip, white cross, i.e. the assembly is not multicolored).
There are other approaches (see related articles) and other methods (see other methods).
Content
1 Stage 1.
Preparation 1.1 Purchase of a speed cube 1.2 Maintenance of a cube 1.3 Communication and training
2 Stage 2.
Correct rotation of the cube 3 Stage 3.
Learning the Friedrich method 3.1 Introduction 3.2 Learning Procedure 3.3 Cross 3.4 F2L 3.4.1 Base F2L 3.4.2 Whole F2L
3.5 OLL 3.5.1 OLL Base 3.5.2 All OLL
3.6 PLL 3.6.1 Base PLL 3.6.2 Whole PLL
4 Stage 4.
Further improvement 4.1 Rotation speed 4.2 Cross 4.3 F2L 4.4 OLL 4.5 PLL 4.6 Additional stages
5 Stage 5.
When everything is learned 5.1 Assembly examples 5.2 Assembly videos
6 Related Articles 7 Other Methods 7.1 Side Grip in F2L 7.2 Color Neutral 7.3 Roux Method 7.4 ZZ Method 7.5 Heice Method 7.6 Petrus Method
8 See also
Stage 1.
Preparation
Buying a speed cube
To master the high speed assembly, you need to buy a high speed cube.
Our recommendation is MoYu AoLong.
You can buy it here.
Cube Maintenance
For high speed assembly, the cube must be regularly cleaned and lubricated.
And also take care to properly adjust the cube for yourself.
Before studying high speed assembly, read these articles:
Customization
Cleaning
Lube
Communication and training
Remember, at each stage of mastering high speed assembly, your time depends on how much you train.
It is also important to go to meetings where you can communicate with experienced coobers.
If meetings are held in your city, it makes sense to immediately start going to them.
Do not be afraid to participate in competitions, even if you collect a cube for more than two minutes.
Participation with any time will serve you well.
Stage 2.
Correct rotation of the cube
If you already have a speed cube, you need to learn how to rotate it correctly.
Watch the suggested video.
How to rotate a Rubik's Cube (Ivan Makachev) (video)
Collect the cube according to your own method for beginners.
Thanks to training and proper rotation, reach the average time of 1: 30.
Stage 3.
Study of the Friedrich method
When your time has reached at least 1: 30, you can start studying the Friedrich method.
At this and subsequent stages, the rotation speed (TPS) will be important.
Develop it in parallel with the study of the method.
Make repeated movements to develop speed.
Do not be afraid if your build time worsens at the initial stage of studying the high speed methodology.
This is normal, it happens to everyone.
With training, the time will improve.
Introduction
Stages of the Friedrich method:
The cross is an assembly of four edges on the first layer.
F2L assembling two layers simultaneously.
OLL orientation of the last layer.
PLL permutation of the elements of the last layer.
Watch the proposed video, and also read the description of the Friedrich method.
Training videos from the Russian record holder Dmitry Dobryakov
Description of the Friedrich method (cubemir.ru)
The order of study
The base is the main algorithms of the stage.
Algorithms that you need to know in order to be able to fully assemble this stage using the Friedrich method.
For example, for the OLL stage, you can collect, knowing only 4 algorithms.
Of course, knowing all the algorithms will speed up the build.
The proposed order of study:
F2L base
OLL Database
PLL database
All F2L
All PLL
All OLL
Alternative options:
Learn F2L, OLL, and PLL in parallel.
First, fully master OLL and PLL, and then proceed to F2L.
First, fully master F2L, and then proceed to OLL and PLL.
Do as it is more convenient for you.
Cross
Your ability to collect the cross is still enough, so start mastering the other stages of the assembly.
The only thing you need to remember about assembling the cross: when assembling the cross, you should always try to keep the cube with the white center down (keep the cross at the bottom when assembling it).
F2L
F2L algorithms do not need to be taught.
The main thing is to understand how they work.
These materials will help you master F2L.
The order of studying F2L: the base of F2L, the entire F2L.
F2L base
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to F2L (Roman Baibusinov) (video, starting from 2: 35)
Introduction to F2L (Peter Zakharov) (video)
Introduction to F2L (Philip Khursevich) (video)
All F2L
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
All F2L algorithms (cubemir.ru)
OLL
These materials will help you master OLL.
The order of studying OLL: the base of OLL, the entire OLL.
OLL Database
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to OLL (Peter Zakharov) (video, starting from 5: 20)
Some OLLS can be remembered associatively.
Tips for memorizing some OLL algorithms (Peter Zakharov) (video)
All OLL
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Manual for the study of OLL (Roman Baibusinov) (video)
All OLL algorithms (cubemir.ru)
PLL
These materials will help you master PLL.
Before studying PLL, it is necessary to know the OLL database.
The order of studying PLL: the PLL base, the entire PLL.
PLL database
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to PLL (Peter Zakharov) (video, starting from 6: 07)
Introduction to PLL (Roman Baibusinov) (video)
The methodology for beginners contains the basic PLL algorithms.
Methodology for beginners (cubemir.ru) (steps 6 and 7)
All PLL
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
All PLL algorithms (cubemir.ru)
All PLL algorithms (Ivan Makachev) (video)
Stage 4.
Further improvement
If you can perform all the algorithms of the Friedrich method without cheat sheets, proceed to further accelerate the assembly.
The video, parts of which you have already watched in the previous stage.
However, look at it in its entirety.
Acceleration of assembly (Peter Zakharov) (video)
Rotation speed
Continue to make repeated movements to develop the rotation speed (increase TPS).
Watch the video on advanced fingertrix.
Advanced fingertrix (Sergey Shmakov) (video)
Cross
Learn to calculate the cross, collect the cross from memory.
Always try to assemble the cross with the white center down (always keep the cross from the bottom when assembling it).
Watch the tutorial video.
Training videos from the Russian record holder Dmitry Dobryakov
Assembling the cross (Ivan Makachev) (video)
Additionally.
You may like to collect X Cross.
X Cross (Nikolay Evdokimov) (video)
X Cross (Sergey Ryabko) (video)
F2L
Watch the video on Expert F2L.
Training videos from the Russian record holder Dmitry Dobryakov
Expert F2L (Sergey Shmakov) (video)
Work on look ahead and edge control.
Collect the cube slowly, you can use the metronome.
Look ahead (Ivan Makachev) (video)
Look ahead (Sergey Shmakov) (video)
Edge control (Nikolay Evdokimov) (video)
Edge control (Antony Brooks) (video, English)
Find the most convenient F2L algorithms for yourself.
F2L algorithm database
OLL
Find the most convenient OLL algorithms for yourself.
Database of OLL algorithms
PLL
Learn how to quickly identify PLL cases.
Definition of PLL (Sergey Shmakov) (video)
Find the most convenient PLL algorithms for yourself.
It is advisable to learn PLL from two or more sides.
PLL algorithm database
To train PLL, do PLL Time Attack.
Additional stages
Advanced techniques to speed up the assembly
speedcubing.ru
VHF2L
OPF2L
WV
SV
COLL
COLL (cubing.com.ua) (ukr.)
ZBF2L (cubing.com.ua) (ukr.)
ZBLL (speedsolving.com) (English)
Stage 5.
When everything is learned
For better results, do more workouts.
Communicate and share your experience with other coobers.
See the examples of the build with an explanation (walkthrough) and just quick builds, take some chips for yourself.
Assembly Examples
Examples of assemblies from the Russian record holder Dmitry Dobryakov
Ivan Makachev, 2 (video)
Alexander Eremin (video)
Ivan Torgashov (video)
Dmitry Dobryakov (video)
Assembly videos
You can find a lot of videos on the channels of speedcubers.
Kubera Channels
It is recommended to familiarize yourself with other methods of high speed assembly.
Related articles
The path from beginner to pro (Sergey Klyakhandler)
Other methods
It is possible that you will achieve results in assembling the cube using other methods.
Check out other approaches to high speed assembly.
A list of all speed techniques is available here.
Side grip in F2L
Side grip — a grip in which the cross is held from the side.
Training:
Alexey Polyashov (video)
Database of algorithms
Assembly Examples:
Sergey Ryabko (video)
Alexey Polyashov (video)
Color Neutral
Color Neutral — Multi color) - assembling a cube from any color.
Multicolour Training (Lisa Kohan) (video)
Roux method
Information about the method
Training:
Eduard Betanyan (video)
Sergey Ryabko, 2, 3 (video)
Description of the method (English)
Waffle Roux Tutorial (English) — a very clear description of the method
The video for each step is a complete CMLL scheme (English) - a very clear explanation
Simplified roux - a topic for beginners on our forum
The complete CMLL scheme by Thom Barlow ( Kirjava) - formulas for all 48 cases
The ZZ method
Training:
Kyyar Nikolaev (video)
Heice method
Detailed instructions from the author of the method (English)
The Petrus method
Detailed instructions from the author of the method (English)
See also
Introduction to speedcubing
Database of algorithms
Author of the article: Ivan Makachev
Keywords: friedrich, how to switch to friedrich, how to learn f2l, how to learn oll, how to learn pll
1
High speed assembly
Material from the Speedcubing Wiki
Go to: navigation, Search
High speed assembly is the assembly of a Rubik's cube for a while.
You can read more about the high speed assembly here.
To study high speed assembly, you need to learn how to quickly rotate the cube, as well as learn algorithms and understand certain principles.
The ability to quickly collect the cube increases the interest of participating in meetings and competitions.
If you have already learned how to assemble a cube using one of the simple techniques and confidently assemble it without cheat sheets, then it's time to think about speeding up the assembly.
This article contains the necessary tips and links to resources for mastering the way to improve the assembly of the cube.
A standard development path is proposed (Friedrich, upper grip, white cross, i.e. the assembly is not multicolored).
There are other approaches (see related articles) and other methods (see other methods).
Content
1 Stage 1.
Preparation 1.1 Purchase of a speed cube 1.2 Maintenance of a cube 1.3 Communication and training
2 Stage 2.
Correct rotation of the cube 3 Stage 3.
Learning the Friedrich method 3.1 Introduction 3.2 Learning Procedure 3.3 Cross 3.4 F2L 3.4.1 Base F2L 3.4.2 Whole F2L
3.5 OLL 3.5.1 OLL Base 3.5.2 All OLL
3.6 PLL 3.6.1 Base PLL 3.6.2 Whole PLL
4 Stage 4.
Further improvement 4.1 Rotation speed 4.2 Cross 4.3 F2L 4.4 OLL 4.5 PLL 4.6 Additional stages
5 Stage 5.
When everything is learned 5.1 Assembly examples 5.2 Assembly videos
6 Related Articles 7 Other Methods 7.1 Side Grip in F2L 7.2 Color Neutral 7.3 Roux Method 7.4 ZZ Method 7.5 Heice Method 7.6 Petrus Method
8 See also
Stage 1.
Preparation
Buying a speed cube
To master the high speed assembly, you need to buy a high speed cube.
Our recommendation is MoYu AoLong.
You can buy it here.
Cube Maintenance
For high speed assembly, the cube must be regularly cleaned and lubricated.
And also take care to properly adjust the cube for yourself.
Before studying high speed assembly, read these articles:
Customization
Cleaning
Lube
Communication and training
Remember, at every stage of mastering I am a speed build your time depends on how much you train.
The result comes with training.
It is also important to go to meetings where you can communicate with experienced coobers.
If meetings are held in your city, it makes sense to immediately start going to them.
Do not be afraid to participate in competitions, even if you collect a cube for more than two minutes.
Participation with any time will serve you well.
Stage 2.
Correct rotation of the cube
If you already have a speed cube, you need to learn how to rotate it correctly.
Watch the suggested video.
How to rotate a Rubik's Cube (Ivan Makachev) (video)
Collect the cube according to your own method for beginners.
Thanks to training and proper rotation, reach the average time of 1: 30.
Stage 3.
Study of the Friedrich method
When your time has reached at least 1: 30, you can start studying the Friedrich method.
At this and subsequent stages, the rotation speed (TPS) will be important.
Develop it in parallel with the study of the method.
Make repeated movements to develop speed.
Do not be afraid if your build time worsens at the initial stage of studying the high speed methodology.
This is normal, it happens to everyone.
With training, the time will improve.
Introduction
Stages of the Friedrich method:
The cross is an assembly of four edges on the first layer.
F2L assembling two layers simultaneously.
OLL orientation of the last layer.
PLL permutation of the elements of the last layer.
Watch the proposed video, and also read the description of the Friedrich method.
Training videos from the Russian record holder Dmitry Dobryakov
Description of the Friedrich method (cubemir.ru)
The order of study
The base is the main algorithms of the stage.
Algorithms that you need to know in order to be able to fully assemble this stage using the Friedrich method.
For example, for the OLL stage, you can collect, knowing only 4 algorithms.
Of course, knowing all the algorithms will speed up the build.
The proposed order of study:
F2L base
OLL Database
PLL database
All F2L
All PLL
All OLL
Alternative options:
Learn F2L, OLL, and PLL in parallel.
First, fully master OLL and PLL, and then proceed to F2L.
First, fully master F2L, and then proceed to OLL and PLL.
Do as it is more convenient for you.
Cross
Your ability to collect the cross is still enough, so start mastering the other stages of the assembly.
The only thing you need to remember about assembling the cross: when assembling the cross, you should always try to keep the cube with the white center down (keep the cross at the bottom when assembling it).
F2L
F2L algorithms do not need to be taught.
The main thing is to understand how they work.
These materials will help you master F2L.
The order of studying F2L: the base of F2L, the entire F2L.
F2L base
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to F2L (Roman Baibusinov) (video, starting from 2: 35)
Introduction to F2L (Peter Zakharov) (video)
Introduction to F2L (Philip Khursevich) (video)
All F2L
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
All F2L algorithms (cubemir.ru)
OLL
These materials will help you master OLL.
The order of studying OLL: the base of OLL, the entire OLL.
OLL Database
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to OLL (Peter Zakharov) (video, starting from 5: 20)
Some OLLS can be remembered associatively.
Tips for memorizing some OLL algorithms (Peter Zakharov) (video)
All OLL
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Manual for the study of OLL (Roman Baibusinov) (video)
All OLL algorithms (cubemir.ru)
PLL
These materials will help you master PLL.
Before studying PLL, it is necessary to know the OLL database.
The order of studying PLL: the PLL base, the entire PLL.
PLL database
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
Introduction to PLL (Peter Zakharov) (video, starting from 6: 07)
Introduction to PLL (Roman Baibusinov) (video)
The methodology for beginners contains the basic PLL algorithms.
Methodology for beginners (cubemir.ru) (steps 6 and 7)
All PLL
speedcubing.ru
Training videos from the Russian record holder Dmitry Dobryakov
All PLL algorithms (cubemir.ru)
All PLL algorithms (Ivan Makachev) (video)
Stage 4.
Further improvement
If you can perform all the algorithms of the Friedrich method without cheat sheets, proceed to further accelerate the assembly.
The video, parts of which you have already watched in the previous stage.
However, look at it in its entirety.
Acceleration of assembly (Peter Zakharov) (video)
Rotation speed
Continue to make repeated movements to develop the rotation speed (increase TPS).
Watch the video on advanced fingertrix.
Advanced fingertrix (Sergey Shmakov) (video)
Cross
Learn to calculate the cross, collect the cross from memory.
Always try to assemble the cross with the white center down (always keep the cross from the bottom when assembling it).
Watch the tutorial video.
Training videos from the Russian record holder Dmitry Dobryakov
Assembling the cross (Ivan Makachev) (video)
Additionally.
You may like to collect X Cross.
X Cross (Nikolay Evdokimov) (video)
X Cross (Sergey Ryabko) (video)
F2L
Watch the video on Expert F2L.
Training videos from the Russian record holder Dmitry Dobryakov
Expert F2L (Sergey Shmakov) (video)
Work on look ahead and edge control.
Collect the cube slowly, you can use the metronome.
Look ahead (Ivan Makachev) (video)
Look ahead (Sergey Shmakov) (video)
Edge control (Nikolay Evdokimov) (video)
Edge control (Antony Brooks) (video, English)
Find the most convenient F2L algorithms for yourself.
F2L algorithm database
OLL
Find the most convenient OLL algorithms for yourself.
Database of OLL algorithms
PLL
Learn how to quickly identify PLL cases.
Definition of PLL (Sergey Shmakov) (video)
Find the most convenient PLL algorithms for yourself.
It is advisable to learn PLL from two or more sides.
PLL algorithm database
To train PLL, do PLL Time Attack.
Additional stages
Advanced techniques to speed up the assembly
speedcubing.ru
VHF2L
OPF2L
WV
SV
COLL
COLL (cubing.com.ua) (ukr.)
ZBF2L (cubing.com.ua) (ukr.)
ZBLL (speedsolving.com) (English)
Stage 5.
When everything is learned
For better results, do more workouts.
Communicate and share your experience with other coobers.
See the examples of the build with an explanation (walkthrough) and just quick builds, take some chips for yourself.
Assembly Examples
Examples of assemblies from the Russian record holder Dmitry Dobryakov
Ivan Makachev, 2 (video)
Alexander Eremin (video)
Ivan Torgashov (video)
Dmitry Dobryakov (video)
Assembly videos
You can find a lot of videos on the channels of speedcubers.
Kubera Channels
It is recommended to familiarize yourself with other methods of high speed assembly.
Related articles
The path from beginner to pro (Sergey Klyakhandler)
Other methods
It is possible that you will achieve results in assembling the cube using other methods.
Check out other approaches to high speed assembly.
A list of all speed techniques is available here.
Side grip in F2L
Side grip — a grip in which the cross is held from the side.
Training:
Alexey Polyashov (video)
Database of algorithms
Assembly Examples:
Sergey Ryabko (video)
Alexey Polyashov (video)
Color Neutral
Color Neutral — Multi color) - assembling a cube from any color.
Multicolour Training (Lisa Kohan) (video)
Roux method
Information about the method
Training:
Eduard Betanyan (video)
Sergey Ryabko, 2, 3 (video)
Description of the method (English)
Waffle Roux Tutorial (English) — a very clear description of the method
The video for each step is a complete CMLL scheme (English) - a very clear explanation
Simplified roux - a topic for beginners on our forum
The complete CMLL scheme by Thom Barlow ( Kirjava) - formulas for all 48 cases
The ZZ method
Training:
Kyyar Nikolaev (video)
Heice method
Detailed instructions from the author of the method (English)
The Petrus method
Detailed instructions from the author of the method (English)
See also
Introduction to speedcubing
Database of algorithms
Author of the article: Ivan Makachev
Keywords: friedrich, how to switch to friedrich, how to learn f2l, how to learn oll, how to learn pll
Source — "http://speedcubing.ru/w/index.php5?title=%D0%A1%D0%BA%D0%BE%D1%80%D0%BE%D1%81%D1%82%D0%BD%D0%B0%D1%8F_%D1%81%D0%B1%D0%BE%D1%80%D0%BA%D0%B0&oldid=6294»
Categories: Training resources Training resources by 3x3x3
Personal tools
Introduce yourself to the system
Namespaces
Article Discussion
Variants
Views
Reading Viewing History
Actions
Search
Navigation
Home Page Community Current Events Recent edits Random Article Help
Tools
Links here Related edits Special Pages Printable version Permanent link
Last modified on this page: 20: 44, February 2, 2016.
This page has been accessed 69,078 times.
The content is available according to Attribution NonCommercial ShareAlike 3.0 Unported.
Privacy Policy Description of Speedcubing Wiki Disclaimer
