A standard drink is a measure of alcohol consumption representing a hypothetical beverage which contains a fixed amount of pure alcohol.
A standard drink varies in volume depending on the alcohol concentration of the beverage (for example, a standard drink of spirits takes up much less space than a standard drink of beer), but it always contains the same amount of alcohol and therefore produces the same amount of drunkenness.
The standard drink is used in relation to recommendations about alcohol consumption and its relative risks to health.
Many government health guidelines specify low to high risk amounts in units of grams of pure alcohol per day, week, or single occasion.
The concept of the standard drink is meant to help visualize and estimate the absolute alcohol content of various drink concentrations and serving sizes.
For example, in the United States, a standard drink contains about 14 grams of alcohol.14 grams of alcohol is 0.6 US fluid ounces or 18 mL.
This corresponds to a  can of 5% beer, a  glass of 12% ABV (alcohol by volume) wine, or a  so-called "shot" of spirit,rethinkingdrinking.niaaa.nih.gov, US NIH Web site:What's a "standard" drink?
assuming that beer is 5% ABV, wine is 12% ABV, and spirits is 40% ABV (80 proof).
Most wine today is higher than 12% ABV (the average ABV in Napa Valley in 1971 was 12.5% }).
80 proof is still the standard for spirits, though higher alcohol content is common.
Different countries define standard drinks differently.
For example, in Australia, a standard drink contains 10 grams of alcohol, but in Japan, one "unit" contains approximately 20 grams.
In addition, a standard drink is often different from normal serving size in the country in which it is served.
Labeling is usually required to give an indication of alcoholic content of a serving.
Australia requires that "the label on a package of an alcoholic beverage must include a statement of the number of standard drinks in the package".
The term "standard drink" was used in the United Kingdom in the first guidelines (1984) that published "safe limits" for drinking, but this was replaced by reference to units of alcohol in the 1987 guidelines and that term has been used in all subsequent UK guidance.
A unit of alcohol is defined there as 10 millilitres (8 grams) of pure alcohol.
This definition is independent of the strength (% ABV) and amount (volume) of any individual alcoholic beverage.
The number of units of alcohol in a bottle or can (and, optionally, the number of units in a typical serving) are indicated on the drink container.
Typical servings deliver 1–3 units of alcohol.
Definitions in various countries
The standard drink or standard unit aims at comparing the pure ethanol regardless of the type of beverage.https://ec.europa.eu/jrc/en/health-knowledge-gateway/glossary#Glossarystandarddrink It helps to educate alcohol users.
These are the amounts of alcohol defined by several countries for standardising measurement of drinking levels and providing public health information.
There is no international consensus on how much pure alcohol is contained in a standard unit.
Some choose to base the definition on mass of alcohol (in grams) while others base the unit on the volume (in mL or other volume units).
This makes different quantities for a "standard" drink/unit in different countries depending on local customs and beverage packaging.
For comparison, both measurements are shown here.
There is no single standard, but a standard drink of 10g alcohol, which is used in the WHO AUDIT (Alcohol Use Disorders Identification Test)'s questionnaire form example, have been adopted by more countries than any other amount.
The terminology for the unit also varies, as shown in the Notes column.
Within the European Union, the most frequent value is 10 g of pure ethanol, followed by 12 g, but units vary from 8 to 20 g.http://www.rarha.eu/Resources/Deliverables/Lists/Work%20Package%206/Attachments/10/RARHA_Toolkit_WP6.pdfhttps://ec.europa.eu/jrc/en/health-knowledge-gateway/promotion-prevention/alcohol
Calculation of pure alcohol mass in a serving
Pure alcohol mass in a serving can be calculated if concentration, density and volume are known.
\mathrm{Pure\ alcohol\ mass} = \mathrm{volume} \times \mathrm{alcohol\ by\ volume} \times \mathrm{volumetric\ mass\ density}
For example, a 350 ml glass of beer with an ABV of 5.5% contains 19.25 ml of pure alcohol, which has a density of 789.24 g/L (at 20 °C), and therefore a mass of 15.19 grams.
350\,\mathrm{mL} \times 0.055 \times 0.78924\,\mathrm{g}/\mathrm{mL} \approx 15.19\,\mathrm{g}
or
0.35\,\mathrm{L} \times 0.055 \times 789.24\,\mathrm{g}/\mathrm{L} \approx 15.19\,\mathrm{g}
When drink size is in fluid ounces (which differ between the UK and the US), the following conversions can be used:
One should bear in mind that a pint in the UK is 20 imperial fluid ounces, whereas a pint in the US is 16 US fluid ounces.
However, as 1 imperial fl.
oz.
≈ 0.961 US fl.
oz., this means 1 imperial pint ≈ 1.201 US pints (i.e. 0.961 × 20/16) instead of 1.25 US pints.
Time to metabolize
As a rough guide, it takes about one hour for the body to metabolize (break down) one UK unit of alcohol, 10 ml (8 grams).
However, this can vary with body weight, sex, age, personal metabolic rate, recent food intake, the type and strength of the alcohol, and medications taken.
Alcohol may be metabolized more slowly if liver function is impaired.
To determine time to metabolize, multiply one hour by the number of alcohol units in the local definition of a standard drink.
For example, in the United States one standard drink contains 14 grams ≈ 1.75 units of alcohol, and so takes the body about an hour and three-quarters to process.
See also
Alcoholic spirits measure
Unit of alcohol
References
External links
Online converter between different countries' standard drinks and units
IARD: Drinking Guidelines General Population by country
Category:Units of volume Category:Alcohol measurement
da:Genstand (alkohol)
